BMW X1 - Page 99

As soon as the message on the control dis-
play disappears, the calibration is complete.
If the message remains active, repeat the cali-
bration.
If the message is still shown after repeated
calibration, have the vehicle checked by an
authorized service center or another qualified
service center or repair shop.
Comfort exit
Principle
The seat position can be adjusted automati-
cally to make it easier to get in and out of the
vehicle.
The seat moves back.
Activating/deactivating the setting
1.
Go through the menu as follows via
iDrive: Apps menu / "Vehicle" / "Seat
comfort" /"Comfort entry"
2. Select the desired setting.
Rear seats
Second row of seats
General information
The backrest tilt can be adjusted for the seats
in the second row.
Safety information
Warning
There is a danger of jamming when moving
the seats. There is a risk of injury or risk
of damage to property. Make sure that the
travel path of the seat is clear prior to any
adjustment.
Warning
There is a danger of jamming when folding
down the center armrest in the rear. There
is a risk of injury. Make sure that the area
of movement of the center armrest is clear
during folding down.
Warning
Seats in the second row of seats are not
locked when they are folded down and they
can move. There is a risk of injury and risk
of damage to property. Only fold the seats
in the second row down while loading. When
driving without a load, fold back and lock the
seats in the second row before driving away.
Longitudinal direction
At the front of the seat, pull the lever for the
longitudinal direction and push the seat in the
desired direction.
After adjusting the longitudinal direction, check
that the seat engages properly.
Seite 99
Seats, mirrors and steering wheel
CONTROLS
99
Online Edition for Part no. 01405A8A536 - VI/23