Setting the longitudinal direction
Warning
If a seat is not locked, it may move unexpect-
edly while driving. Vehicle control could be
lost. There is a risk of accident, injury, and
property damage. After adjusting, move the
seat forward or back slightly, making sure the
seat engages properly.
To adjust the longitudinal direction, pull up the
longitudinal direction lever at the front of the
seat and push the seat in the desired direction.
Adjusting seat tilt
To adjust the seat tilt: On the front of the seat,
push the seat tilt lever up or down as many
times as necessary for the seat to reach the
desired tilt.
Adjusting the height
To adjust the height: On the side of the seat,
push the front seat height lever up or down as
many times as necessary for the seat to reach
the desired height.
Adjusting backrest tilt
To adjust the backrest angle, pull the backrest
tilt lever on the side of the seat and tighten or
loosen the backrest as required.
Electrically adjustable seats
Principle
Electrically adjustable seats are operated us-
ing the switches on the seat.
The current seat position can be stored using
the memory function.
Additional information:
Memory function, refer to page 109.
Seite 97
Seats, mirrors and steering wheel
CONTROLS
97
Online Edition for Part no. 01405B46537 - VI/24
To Next Page
