Examine the equipment
periodically in order to detect
any damage or wear which
may have been produced. The
safety level of the equipment
can be maintained only if it is
examined regularly for
damage and wear, e.g. ropes,
pulleys, connection points
2. Lubricate moving parts with
light oil periodically to prevent
premature wear. Special
attention to components most
3. Inspect and tighten all parts
before using the equipment,
replace any defective parts
immediately, and do not use
the equipment again until it is
in perfect working order.
4. The equipment can be
cleaned using a damp cloth
and mild non-abrasive
detergent. Do not use
solvents.
5. Do not attempt to repair this
equipment yourself. Should you
have any difficulty with assembly,
operation or use of your exercise
product or if you think that you
may have parts missing, contact
the manufacturer, their approved
service agent.
Care and Maintenance
The free area must be at least 0.6m greater than the training area. This is a space where you can safely
dismount, without obstruction, in case of an emergency. Where two pieces of equipment are positioned
adjacent to each other the free area may be shared.
Workout Area
13
Any questions please email to bolangfitness@outlook.com
To Previous Page
Loading...