Bob and Brad 721 - Product Maintenance and Storage; Troubleshooting Common Issues

9
•
•
•
•
•
Troubleshooting
•
•
•
•
When not using the massager, store it back in the box and place it in a
dry, well-ventilated, and cool area.
Do not twist wires.
Avoid sharp objects to prevent scratching the surface of the product.
Keep out of direct sunlight and high temperatures.
Unplug the power cord before cleaning.
Only use a dry cloth to clean the surface of the product.
Do not use corrosive cleaners such as benzene or bleach products.
The fabric pouch can be removed for cleaning.
Keep the product clean and away from moisture. Cover up the product
when not in use to avoid dust.
Product Maintenance
Problem
A. Storage
B. Cleaning
C. Maintenance
Possible Reason
No power
Function keys are not
responding.
No power
15-minute massage session
has ended
Overheated after continuous
use for a long time
Auto shut-off due to
excessive force
Possible Solution
Check the power supply.
Restart the massager using the power
button or unplug the device.
Check the power supply.
Press the "Power" button for another
session.
Unplug the massager and allow it to
cool down for 60 minutes before using
it again.
Unplug the massager. Lighten the
pressure before turning it on again.
Massager not
responding
Massager suddenly
stops working