Why is my Bob and Brad 721 Massager not responding?
If your Bob and Brad massager isn't responding, the issue could be due to a lack of power. Check the power supply to ensure it's properly connected and functioning. Alternatively, if the function keys aren't responding, try restarting the massager using the power button or unplugging the device.
What to do if my Bob and Brad Massager suddenly stops working?
If your Bob and Brad massager suddenly stops working, there are several potential causes: * **No power:** Check the power supply. * **15-minute session ended:** Press the "Power" button to start another session. * **Overheating:** Unplug the massager and let it cool down for 60 minutes. * **Auto shut-off:** Unplug it and reduce pressure before restarting.
Why did my Bob and Brad 721 shut off?
Your Bob and Brad massager might have shut off for a few reasons. It could be due to a lack of power, so check the power supply. It may also be that the 15-minute massage session has ended, in which case you should press the power button for another session. If you've been using it continuously for a long time, it might have overheated, so unplug it and let it cool for 60 minutes. Finally, it could have auto shut-off due to excessive force; unplug it and lighten the pressure before turning it on again.
General| Model | 721 |
|---|---|
| Category | Massager |
| Type | Handheld Percussion Massager |
| Power Source | Rechargeable Battery |
| Massage Type | Percussion |
| Heat Function | No |
| Number of Speed Settings | 5 |
| Target Areas | Full Body |
| Attachments | 5 interchangeable heads |
Consult doctor for health issues, read manual, not for impaired persons, supervise children.
Read manual, no medical substitute, limit usage time, supervise children, avoid specific conditions/groups.
Massage pleasant, no use on wounds, avoid alcohol/sedatives, normal skin reactions, don't press hard, secure cords, keep away from water.
Switch off before unplugging, no user-serviceable parts, no wet hands/feet, no carrying by cord, no use while sleeping/sleepy.
No liability for misuse, avoid heat sources, no hot burners, consult doctor for persistent pain.
Use correct extension cord specs, keep cord from hot surfaces, do not use damaged cord/plug.
Device complies with Part 15 of FCC Rules, no harmful interference, must accept interference.
Equipment tested for Class B limits, designed for reasonable protection against interference.
Product name, model, AC adapter input, product input, timer, weight, dimension, package contents.
Illustration of the massager showing control panel and AC charger.
Instructions for use, including storage, power supply, connecting cord, and starting massage.
Detailed explanation of power, knead intensity, air pressure, air mode, and heat functions via buttons.
Step-by-step instructions with images on how to attach the stand accessory.
Instructions for storage, cleaning, and general maintenance to keep the product in good condition.
Common problems like massager not responding or stopping, with their possible reasons and solutions.
Details the one-year warranty, coverage, exclusions, and how to obtain service.
Contact information for customer service, including phone number, email, and address.
To Next Page
