BOB-CAT 912480 - Page 22

20
QUICKCAT
MOWERS
®
SPECIFICATIONS
ENGINES
MODEL NUMBER 912480 912520 912610
MANUFACTURER Kawaskai Kawasaki Kawasaki
MODEL FX651V FX691V FX760V
CYLINDERS 2 2 2
COOLING Air Air Air
BORE/STROKE 3.1 X 3.0"
(80 X 67 mm)
3.1 X 3.0"
(80 X 67 mm)
3.1 X 3.0"
(80 X 67 mm)
DISPLACEMENT 44.3 cu. in.
(726 cc)
44.3 cu. in.
(726 cc)
44.3 cu. in.
(726 cc)
COMPRESSION 8.2:1 8.2:1 8.2:1
OUTPUT POWER
OUTPUT TORQUE 39.0 ft-lb (52.8J)
@2200 rpm
39.4 ft-lb (53.4J)
@2200 rpm
42.1 ft-lb (55.4J)
@2400 rpm
LUBRICATION FULL PRESSURE FULL PRESSURE FULL PRESSURE
GOVERNOR Mechanical Mechanical Mechanical
AIR CLEANER Heavy Duty Cyclonic Heavy Duty Cyclonic Heavy Duty Cyclone
IGNITION SYSTEM Electronic Electronic Electronic
CHARGING SYSTEM 15 amp, regulated 15 amp, regulated 15 smp, regulated
BATTERY BCI group U1 BCI group U1 BCI group U1
FUSES Two, 20 amp blade Two, 20 amp blade Two, 20 amp blade
CONSTRUCTION:
Fabricated and welded 10-gauge, double-layer steel
top with 7-gauge side skirts. Full oating design.
CUTTERDECK DRIVE SYSTEM:
Electric clutch/brake drives belt directly from engine to
cutterdeck. No twists in drive belt.
Torque information located on page 12.
SPINDLES:
Top mounted and maintenance free, with 1” shaft in
precision machined, aluminum housing
CUTTING HEIGHT & PRODUCTION:
Height: Lever allows easy setting of cut heights
from 1-1/2" to 4-1/2" in 1/4” increments.
CUTTERDECKS
MODEL NUMBER 912480 912520 912610
TYPE Side Discharge Side Discharge Side Discharge
CUTTING WIDTH 47.25" (120 cm) 52.5" (133 cm) 61" (155cm)
WIDTH (CHUTE UP) 48.38" (122.5 cm) 53.88" (137 cm) 62" (157sm)
WITDH
(CHUTE DOWN)
60.88" (154.5cm) 66.38" (168.5 cm) 73" (18sm)
BLADE high lift high lift high lift
NUMBER OF
BLADES
3 3 3
BLADE LENGTH 16.25" (41 cm) 18" (46 cm) 21" (53cm)
BLADE THICKNESS .205" (5.2 mm) .205" (5.2 mm) .25 (6.35mm)
TIP SPEED 17773 ft/min
5420 m/min
@3600 Engine RPM
18585 ft/min
5665 m/min
@3600 Engine RPM
18850 ft/min
5745
@3600 Engine RPM
ANTI-SCALP ROLL-
ERS
4 4 4