45
ITEM PART NO. DESCRIPTION QTY
ITEM PART NO. DESCRIPTION QTY
QUICKCAT
MOWERS
®
FIGURE 12
48" SIDE DECK ASSY
1 4171369 S-48" DECK W/ LABELS 1
2 4165022 ASSY-CTRDCK SPINDLE 3
(INCLUDES ITEMS 21-25)
3 4170134 PULLEY-SPINDLE,48IN 3
4 4118314 SPACER-BLADE 3
5 112111-01 BLADE 16.25 OFFST HLFT 3
6 4170021.7 WLDMT-IDLER PIN 1
7 4163014 SPACER 1
8 4163155 INNER RING 1
9 4171371 S-IDLER ARM 1
(INCLUDES ITEMS 10-15)
10 521438 GREASE SEAL 1
11 548138 BRG NDL.88 1.12 1.00 END 1
12 4128004 BEARING-BALL 10 X 26 X 8 1
13 85010N ZERK 1/4-28 STR S-THRD 1
14 64144-40 SNAP RING-26MM INTERNAL 1
15 4170610.7 WLDMT-IDLER ARM 1
16 4170510.7 WLDMT-IDLER BELT GUIDE 1
17 4171864 BELT-48IN DECK 1
18 4169716 SPRING-EXTENSION 1
19 4152578-01 SPACER-2.0 X .516 X .938 3
20 128169 PULLEY IDLER 5.50 1
21 4164948 HOUSING-SPINDLE 3
22 38348-01 BEARING-SPINDLE SEALED 6
23 4170088 PULLEY-5.25" X 2.5"W 1
24 38315 NUT-SPINDLE 3
25 2183070-01 SHAFT-SPINDLE LONG 3
26 64151-37 NUT-HEX, 1/2-13 INSRT JAM 1
27 64018-34 BLT-CRG 5/16-18 X 1-1/2 1
28 4128002 CAP-26 X 7 END 1
29 2721512 ROLLER-5X2.75 CENTERED 4
30 2720685 SPACER-ROLLER 4
31 64270-02 BLT-HEX M10-1.5x30 1
32 4163802-02 SPACER-1.0 X .516 X 1 3/16 1
33 64229-02 NUT-NYLON LOCK 5/16-18 1
34 64141-6 NUT-WLF 5/16-18 2
35 64123-173 BLT-HEX 3/8-16X4-1/2 1
36 64018-30 BLT-CRG 3/8-16 X 4-1/2 3
37 64262-012 BLT-FLG HD 3/8-16 X 1-1/4 18
38 64123-187 BLT-HEX 5/8-18X3-3/4 3
39 64018-33 BLT-CRG 1/2-13 X 4-1/2 1
40 4164269 LABEL-WRNNG THRWN 1
41 2000577 DECAL, "ROTATING PARTS" 3
42 4162914 LABEL-DECK SIZE,48 1
43 4116761 LABEL-MADE IN USA 1
44 64018-7 BLT-CRG 3/8-16X1-1/4 3
45 64229-03 NUT-NYLON LOCK 3/8-16 25
46 64209-03 SPRING WASHER.67 ID 6
47 64123-137 BLT-HEX 5/8-18X2 3
48 64164-13 KEY 1/4 X 2 SQ 3
49 64158-08 EYE BOLT 5/16-18 X 2.5 1
50 64018-16 BLT CRG 1/2-13 X 5 1
51 64268-05 NUT-FL NYLON LOCK 1/2-13 2
52 4170596.7 SHIELD-BELT,48IN 1
53 64018-15 BLT-CRG 5/16-18X1 2
54 64268-02 NUT-FL NYLON LOCK 5/16-18 2
55 4171408 LABEL-SPRING LENGTH 1
56 2000572 LABEL-WARNING BLADES 1
*NOT ILLUSTRATED
To Next Page
Loading...