• 1080P30 14.3G
00000
11
2018-11-05
Attention:
A. During video recording, if the battery power is insufficient, the system will save current record and
warn "low battery power" until the camera turned off;
B. During video recording process, if the memory is fully (cycle video recording is disabled), the system
will save current record and return to standby interface;
C.After night vision is enabled, the video will be black and white. It is normal;
D.When turning on loop recording, after storage is full, the camera will keep recording by covering old data.
https://www.boblov.com I Support@boblov.com
15
To Next Page
Loading...
