40 41
It is recommended that you remove and clean Junior’s side brush on a weekly basis.
To clean Junior’s side brush:
Side Brush
Remove the side brush
using a flat head screw-
driver.
Replace the side brush
and re-tighten the screw.
Use the cleaning tool to
brush off hair tangled
around the side brush as
well as the socket where
the side brush is held.
1 2 3
Dirt and dust on Junior’s wall and edge sensors can reduce his performance. Regularly
cleaning these sensors ensures that Junior keeps working at his best.
To clean Junior’s sensors:
Gently wet a soft cloth with cold water or rubbing alcohol. Then, wipe the wall sensors
along Junior’s bumper and the oval-shaped edge sensors on his underside.
Sensors
To Next Page
Loading...
