Need help?Do you have a question about the BOCI BLT 642H and is the answer not in the manual?
Provides a visual overview of the cutting head components and interfaces.
Details key specifications like laser wavelength, power, and interface types.
Explains the status and meaning of various LED indicators on the cutting head.
Details the wiring diagram for the bus system configuration.
Details the wiring diagram for non-bus system configurations.
Outlines necessary preparations, including clean workbench and cleaning kit.
Details the step-by-step procedure for installing the cutting head.
Step-by-step guide for connecting the optical fiber to the cutting head.
Instructions for physically attaching the cutting head to the machine's backplane.
Describes how to connect the water cooling system to the cutting head.
Details the process of connecting cutting gas and nozzle cooling gas pipes.
Steps for installing the ceramic body and nozzle assembly.
Procedures to verify the cutting head's functionality after installation.
Guide for aligning the laser beam to the center of the nozzle.
Illustrates the internal components and structure of the cutting head.
Step-by-step instructions for replacing the upper protective lens.
Step-by-step instructions for replacing the lower protective lens.
Provides critical dimensions for mounting the cutting head onto machinery.
Details the different interface types available for the BLT 642H cutting head.
Presents physical dimensions for QBH and QD versions of the cutting head.
Presents physical dimensions for Q+ and ADD versions of the cutting head.
General| Brand | BOCI |
|---|---|
| Model | BLT 642H |
| Category | Industrial Equipment |
| Language | English |
To Next Page