Need help?Do you have a question about the BOCI BLT 662H and is the answer not in the manual?
Visual overview of the cutting head's structure and components.
Details specifications like laser wavelength, power, spot magnification, and operating conditions.
Explains the status indications for POWER, RUN, LINK, and SENSOR LEDs.
Details waterproof precautions for PWE and aviation plug interfaces, including dust plug usage.
Illustrates the wiring diagram for the BLT662H cutting head in a bus system configuration.
Shows the wiring diagram for the BLT662H cutting head in a non-bus system configuration.
Lists required objects and preparation steps before installing the cutting head.
Detailed process for preparing the clean bench and installing the fiber optic cable.
Instructions on how to mount the cutting head onto the machine's Z-axis backplane.
Details the connection of water-cooled modules for the cutting head and amplifier.
Explains how to connect the cutting gas and nozzle cooling gas pipes.
Instructions for installing the ceramic body and nozzle onto the cutting head.
Steps to test the cutting head's functions using laser cutting software.
Guide on how to perform manual alignment to center the laser beam on the nozzle.
Provides a detailed exploded view of the cutting head components and their specifications.
Step-by-step instructions for replacing the upper protective lens of the cutting head.
Step-by-step instructions for replacing the lower protective lens of the cutting head.
Provides dimensional drawings and specifications for cutting head installation.
Illustrates the different interface types (QBH, QD, Q+, ADD) for the BLT 662H cutting head.
Shows the mechanical dimensions for QBH and QD interface types of the cutting head.
General| Brand | BOCI |
|---|---|
| Model | BLT 662H |
| Category | Industrial Equipment |
| Language | English |
To Next Page