EasyManua.ls Logo

Body Break 16116828 - User Manual

Body Break 16116828
20 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
MAGNE
T
IC RECUMBENT
CYCLE
OWNER’S MANUAL
MODEL NO.
16116828
z Assembly
z Operation
z Trouble –Shooting
z Parts
z Warranty
CAUTION:
You must read and
understand this owner’s
manual before operating
unit.
RETAIN FOR
FUTURE REFERENCE
MAURICE PINCOFFS CANADA INC. 6050 DON MURIE STREET, NIAGARA FALLS, ONTARIO
L2E 6X8

Questions and Answers

  • T
    tiffany22Aug 2, 2025
    What to do if no speed or distance displays on my Body Break Exercise Bike?
    • J
      Jonathan AndersonAug 2, 2025
      If no speed or distance displays on the monitor of your Body Break Exercise Bike, there are several possible causes. First, the sending unit might not be connected properly; make sure to securely plug the sending unit into the extension wire and the back of the monitor. Alternatively, the sending unit or the monitor itself might not be working correctly, in which case you should consider replacing the sending unit or the monitor.
  • S
    Sherry WardAug 8, 2025
    Why is the heart rate not displaying on my Body Break 16116828?
    • M
      Matthew GonzalezAug 8, 2025
      If the heart rate is not displaying on your Body Break Exercise Bike, it could be due to a few reasons. First, check if the pulse wire or ear clip is not connected properly; securely plug the wires into the back of the monitor. Also, the hand pulse grip or ear clip might be defective and need replacement. Finally, the monitor itself might not be working correctly, and you may need to replace it.
  • M
    Megan RichardAug 14, 2025
    Why is there no tension on my Body Break 16116828?
    • K
      Kimberly AdamsAug 14, 2025
      If you're experiencing no tension on your Body Break Exercise Bike, there are several potential causes. Ensure the gear box wire is securely plugged into the extension wire and the back of the monitor. If that's not the issue, the gear box, the monitor, or the magnetic wheel might not be working properly. Consider replacing the gear box, the monitor, or the magnetic wheel to resolve the problem.
  • C
    Curtis JonesAug 20, 2025
    How to stop squealing from Body Break 16116828?
    • L
      Lindsey PageAug 21, 2025
      If your Body Break Exercise Bike is squealing, it's likely due to a slipping V-belt. Try adjusting the V-belt to resolve the issue.
  • M
    morgan87Aug 27, 2025
    What to do if the monitor does not display on my Body Break 16116828 Exercise Bike?
    • D
      Dr. Nicole MoralesAug 27, 2025
      If the monitor on your Body Break Exercise Bike does not display, the batteries may be weak or dead. Replace the batteries to resolve this issue.

Summary

Manufacturers One-Year Limited Warranty

Repair Parts and Service

Safety Precautions

Pre-Assembly Check List

Parts Bag Packing List

Assembly Instruction

Step 1. Attaching the Stabilizers

Attach the front and rear stabilizers to the frame using specified bolts, washers, and nuts.

Step 2. Attaching the Handlebar

Connect the handlebar to the rear frame and secure it with bolts, washers, and nuts.

Step 3. Attaching the Seat and Back Cushion

Attach the seat and back cushion to the rear frame and backrest support tube using bolts.

Step 4. Attaching the Handlebar Post

Install batteries, connect wires, and attach the computer to the support tube and frame.

Step 5. Attaching the Pedal

Attach the pedal straps to the pedals and then connect the pedals to the crank arms.

Monitor Instruction

Part List

Diagram

Trouble Shooting Guide

Training Guidelines

Exercise Principles

Covers exercise principles like specificity and reversibility for effective training.

Workout Preparation and Monitoring

Details warm-up, cool-down, and heart rate monitoring for optimal exercise.

Body Break 16116828 Specifications

General IconGeneral
BrandBody Break
Model16116828
CategoryExercise Bike
LanguageEnglish

Related product manuals