frequency that provides the best level
of comfort.
7. When you begin the stimulation, the
beeper sound will stop and the green
light will flash, indicating that
stimulation has begun.
8. Using the intensity control switch you
can adjust the intensity to a
comfortable level pressing the "+" or
"-" keys to either increase or
decrease intensity. The intensity level
will be indicated by the LED scale. If
the LED nearest to the tip is flashing,
the unit is set at minimum intensity. If
the LED furthest from the tip is
flashing, the unit is set at maximum
intensity.
9. Once stimulation is over, the device
switches back to search mode and the
beeper sound will be audible again.
10. During stimulation you may feel the
electric current at the stimulation site.
11. The ear piece included with this unit
may be used to mute the beeper
sound enabling the user solely to hear
this sound. This piece consists of a
lead with a jack plug at one end and
the ear piece at the other end. To
activate the ear piece, insert the jack
plug into the earphone jack. The ear
piece is now ready for use.
12. A precision extension tip is also
provided, which can extend the tip (+)
to assist you where an acupoint is
difficult to reach. This is simply placed
over the tip and is then ready for use.
10
To Next Page
Loading...
