be purchased separately) may be
used to the same effect. The wrist
strap consists of a lead with the wrist
strap at one end and a jack plug at
the other end. If the strap is used,
the jack plug should be inserted into
the jack on the underside of the
device. The wrist strap should then
be worn by the other party. There is
then no need for physical contact to
be maintained between the operator
and the other party. Stimulation may
then be commenced.
3. Begin stimulation by selecting the
desired stimulation time by setting
the time selector switch. A preset
time of 30 or 60 seconds may be
selected or alternatively manual
stimulation, which lasts as long as
you choose.
4. If a preset stimulation time is
chosen, just press the stimulation
button briefly and release. The
device will automatically stop
stimulating when the preset time is
over. If manual stimulation is
selected, the device will stimulate for
as long as you press the stimulation
button.
5. When the unit is switched off, the
intensity level will automatically be
reset to minimum. You can see the
previous intensity setting by pressing
the intensity button, after which, the
previous intensity will appear for 5
seconds in the 6 LED bar scale. You
can then increase or decrease that
4
To Next Page
Loading...
