5
preset intensity level before
beginning stimulation.
6. You may select one of three rhythm
options during stimulation:
continuous, 1Hz or 4Hz. You can
select the rhythm that provides the
best level of comfort.
7. When you begin the stimulation, the
beeper sound will stop and the green
light will flash, indicating that
stimulation has begun.
8. Using the intensity control switch
you can adjust the intensity to a
comfortable level pressing the "+" or
"-" keys to either increase or
decrease intensity. The intensity
level will be indicated by the LED
scale. If the LED nearest to the tip is
flashing, the unit is set at minimum
intensity. If the LED furthest from the
tip is flashing, the unit is set at
maximum intensity.
9. Once stimulation is over, the device
switches back to search mode and
the beeper sound will be audible
again.
10.During stimulation you may feel the
electric current at the stimulation
site.
11. The ear piece included with this unit
may be used to mute the beeper
sound enabling the user solely to
hear this sound. This piece consists
of a lead with a jack plug at one end
and the ear piece at the other end. To
activate the ear piece, insert the jack
plug into the earphone jack. The ear
piece is now ready for use.
To Next Page
Loading...
