Need help?Do you have a question about the Body Solid EMX1500.4 and is the answer not in the manual?
Introduces the assembly process for the Body-Solid EXM1500.4 gym equipment.
Specifies the width, length, and ceiling height requirements for the gym.
Illustrates the necessary space for safe and effective operation.
Detailed steps for assembling the main base and upright supports.
Connecting the main uprights and seat assembly to the base.
Steps for mounting the weight stack and selector rod.
Installation of various brackets and support pieces for stability.
Attaching the seat and foam roller pads to the equipment.
Securing the selector rod and initial cable connections.
Crucial safety advice regarding the selector rod bolt and jam nut.
Guiding cables through pulleys for upper body exercises.
Guiding cables for lower body and leg extension exercises.
Completing the cable path through the weight stack.
Comprehensive list of hardware parts with part numbers and descriptions.
Listing of different cables used for various exercises.
Details of accessories such as grips, straps, and pads.
Identification and descriptions of the primary frame components.
Visual representations of various hex head bolts with size references.
Illustrations of hex head and carriage bolts with their dimensions.
Visuals of nuts, washers, and end caps with quantities.
An overall diagram showing all parts in their assembled positions.
General| Stations | 4 |
|---|---|
| Press Arm | Yes |
| Leg Press | Yes |
| Weight Stack | 150 lbs |
| Frame Material | Steel |
| Warranty | Lifetime |
To Next Page