BODYMAX CF800 - Page 20

10
H12-18
W12
N12
N12
W12
W12
6
36
W12
H12-13
4
3
2
20
CF800
Step 6: Assembly of the Carriage and the Upright Frame to the Rails
1. Slide the carriage stop tube (36) in between the right and left rails (3 & 4).
2. Slide the carriage (6) in between the right and left rails (3 & 4).
3. Attach the rear upright (10) to the base connector (2) with two bolts (H12-13), four washers
(W12) and two nuts (N12).
4. Attach the rear upright (10) to the right and left rails (3 & 4) with one bolt (H12-18), two washers
(W12) and one nut (N12) each.