BodyTrace BT104 - Reading Accuracy and Consistency; Measurement Discrepancies and Errors

10
Problem
Readings
too high or low.
or
Readings
very signicantly
between
measurements.
Measurement
results dier
from those
measured at
doctor’s oce.
Error code
shown after
measurement.
Possible Reason
Cu not positioned
correctly.
Measurements
taken in a medical /
professional
environment
(white coat eect)
may aect your
blood pressure.
Measurement
accuracy may be
aected or
transmission
may have been
unsuccessful.
Movement during
measurement.
Resolution
Review instructions
on Securing the Cu,
and retry
measurement.
Measurements taken
in a more relaxed,
home environment
may avoid eects
experienced in
clinical settings.
Continue taking
readings as usual.
If in doubt, contact a
medical professional.
Consult the error
code table on page
11-12 for more
information and
further
instructions.
Place your arm on
a table with your
palm facing up. The
cu should be at the
same level as your
heart. Make sure you
stay still and don’t
talk during
measurement.