BodyTrace BT104 - Troubleshooting; Power and Inflation Issues; Cuff Fit and Assembly

9
Troubleshooting
Problem
Device
doesn’t power on
when START/STOP
button is pressed.
or
Cu does not
inate.
(display remains
o)
Cu does not
inate.
(display turns on)
Cu doesn’t form a
loop around arm.
Possible Reason
Batteries
completely drained.
Cu not plugged in
correctly.
Cu not assembled.
Batteries inserted
with incorrect
polarity.
Resolution
Replace batteries
with new
Duracell AA.
Make sure the
connector on cu
tube is plugged all
the way into the
device.
To form a loop:
pass the end of the
cu furthest away
from the tubing
through the long
metal D-ring.
The smooth side
(without the hook
and loop fasteners)
should be on the
inside of the cu
loop.
Remove batteries
and reinstall them
making sure the +
and - polarity
symbols on the
batteries match
those inside the bat-
tery compartment.