7
15. The device automatically transmits measurement
results. During this process an indicator is shown in
the middle of the display.
16. When the measurement is successfully transmitted,
the device shows the following indication before
powering o
Transmission
in progress
Transmission
successful
Notes:
• If you wish to abort the measurement while the cu is
inating, press and hold the START / STOP button
for 5 seconds.
• If the device detects an irregular heartbeat, the display
will show this indicator along with the
measurement results. While this may not be a reason
for immediate concern, contact your primary care
provider if you see this symbol frequently.
To Next Page
Loading...
