Page 6
Touch Pad Operation
Boema machines are delivered with programmed deliveries for Short Black, Long Black,
Two Short Blacks and Two Long Blacks. Delivery commences once you press the desired button
for your selection and will automatically stop once the programmed level has been achieved. Should
you wish to halt delivery prior to full delivery from the programmed cycle, simply press the same
selection button again.
The symbol on the touch pad is operated for manual delivery. Press the key to commence
delivery; press it again to stop delivery.
To change settings:
1. Put the cup underneath the group from which you wish to deliver
2. Hold the button pressed until the lights above the selection buttons all come on – signifying
programming mode
3. Press the button representing the delivery you wish to alter – delivery commences with the
light remaining on only above the button being programmed and above the button
4. When the desired delivery is achieved, press the same button again. The delivery stops and
the light goes out above the button now reprogrammed
The lights reappear above the buttons that have not had their deliveries reset and remains on
above the key, signifying programme mode
5. While the lights remain on signifying programming mode, you may move to another selection
or readjust the same selection, even though the light does not appear above that selection
button
6. When the light goes out above the key and above the keys which have not had their
settings altered, the machine has returned to normal operation mode.
Note: Return to Step 2 if you wish to continue with programming.
Warning:
The programme allows only a very short time to proceed to the next setting prior to going out of
programme mode. Should this happen, the settings you have achieved will remain. To adjust those
deliveries not yet set by you, you need to go back to Step 2, and then proceed directly to the button
that you wish to set.
Handy Hint
Have at hand the number of empty cups to suit the number of deliveries you wish to do or simply stick
to re-entering programme mode for adjustment of one delivery at a time.
To Next Page
