Need help?Do you have a question about the BOGBALLE M Series and is the answer not in the manual?
Essential safety rules and protection guidelines for operating the spreader.
Defines operator responsibility and manufacturer liability for spreader use.
Step-by-step operational guides for various spreader models and control systems.
Visual diagrams illustrating key components of the M-line and L-line spreaders.
Provides technical data including weight, volume, dimensions, and load capacity.
Instructions for finding and interpreting spread charts for fertiliser application.
Explains the basic principle and definition of the standard calibration set point value.
Details on fully automatic calibration using CALIBRATOR ZURF or ISOBUS.
Procedures for manual calibration on the spreader using MC.
Using the S-indicator to determine the STD calibration value.
Instructions for unloading or draining remaining fertiliser from the hopper.
Guidance on switching between normal, headland, and border spreading modes.
Covers PTO speed, tilt angle, working height, quantity, and width settings.
Details on connection rods and outlet shutters for regulating fertiliser flow.
Procedures for analysing fertiliser quality using D- and F-indicators and tray tests.
Adjusting tilt angle and PTO speed for optimal spread patterns.
Control system configurations for spreading on irregular field shapes.
Illustrations showing reduced working width concepts.
How to set up controls for reduced working width on various models.
Guidelines for lubricating components and performing normal maintenance.
Instructions on preventing corrosion, especially from mineral fertilisers.
Ensuring safe axle load distribution and compliance with tractor limits.
Manufacturer's declaration of machine compliance with relevant directives.
Blank pages for user annotations and important remarks.
To Next Page
General