BOGBALLE M2W - User Manual

M-line
GB
M2(W) / M3(W) / M6W
Operator’s Manual
0404-02-01-14 V15

Summary

Maintenance and Care

Normal Maintenance

Details the essential daily and regular maintenance procedures for the machine to ensure longevity and proper operation.

Special Maintenance, Friction clutch

Focuses on the maintenance and cleaning of the friction clutch for transmission protection and overload prevention.

Safety and Protection

Spreading System

Setting System

Setting Pointer, Hydraulic; Calibrator

Instructions for mounting and adjusting the setting pointer for correct shutter closure at scale '0'.

Adjustment Shutters

Guidance on adjusting shutters for symmetrical distribution and proper closure in the V-mark of the bottom plate.

Function

Machine Settings

General Guidance for Machine Settings

Provides an overview of key settings like PTO speed, tilt angle, working height, and quantity for optimal operation.

PTO- Speed

Explains the recommended PTO speed of 540 rpm for normal spreading and 450 rpm for low grain strength fertilizers.

Tilt Angle

Details how tilt angle optimizes spread patterns, recommending tilting too much over too little for accuracy.

Quantity Setting, Spread chart; Internet

Vane; Spread Width Setting

Function of Spreading Vane

Normalspreading

Headland Spreading

Spreading Systems

Practical Test

Test with Test Trays

Headland Spreading, To Border

Headland Spreading, From Border

Headland Spread Width Categories

Practical Test (Headland)

Measuring and Calculation

Examples of Headland Spread Patterns - To Border

Reduced Spread Width

Turnings at the Headlands

Spreading on Non Rectangular Fields

Checks of Tractor - Before Use

Check of Spreader- Before Use.

Practical Hints

M()W - Special

How to Use the Quadro Calibration System

Procedure:

Flow Factor Calculation

Pictogram

BOGBALLE M2W Specifications

General

Brand	BOGBALLE
Model	M2W
Category	Spreader
Language	English