Bolens 332 User Manual

Operator's Manual
Front Tine Tiller
Model 332
IMPORTANT: READ SAFETY RULES AND INSTRUCTIONS CAREFULLY
Warning: This unit is equipped with an internal combustion engine and should not be used on or near any unimproved forest-
covered, brush-covered or grass-covered land unless the engine's exhaust system is equipped with a spark arrester meeting
applicable local or state laws (if any). If a spark arrester is used, it should be maintained in effective working order by the operator.
In the State of California the above is required by law (Section 4442 of the California Public Resources Code). Other states may have
similar laws. Federal laws apply on federal lands. A spark arrester for the muffler is available through your nearest engine authorized
service dealer or contact the service department, P.O. Box 361131 Cleveland, Ohio 44136-0019.
TROY-BILT LLC, P.O. BOX 361131 CLEVELAND, OHIO 44136-0019
PRINTED IN U.S.A. FORM NO. 769-00521
(10/2002)

Bolens 332 Specifications

General

Brand	Bolens
Model	332
Category	Tiller
Language	English

Summary

Important Safe Operation Practices

Training

General training requirements for safe operation and manual usage.

Preparation

Steps to take before starting the tiller to ensure safe operation.

Operation

Guidelines for safe operation, including handling, ground conditions, and visibility.

Assembling Your Tiller

Before Assembly

Know Your Tiller

Tine Clutch Control

Depth Stake

Throttle Control

Operating Your Tiller

Gas And Oil Fill-Up

Instructions for fueling the tiller with gasoline and oil.

Starting Engine

Step-by-step guide for safely starting the tiller's engine.

Stopping Engine

Using Your Tiller

Overview of the tiller's purpose and applications in gardening.

Controlling Speed And Tilling Depth

How to manage tiller speed and working depth using adjustments.

Wheel Yoke Adjustment

Depth Stake Adjustment

Handle Pressure

Cultivating

Making Adjustments

Tine Width Adjustment

Maintaining Your Tiller

Engine Maintenance

Lubrication

Guide to lubricating various parts of the tiller for proper function.

Belt Replacement

Off-Season Storage

Troubleshooting

Engine Fails to Start

Common causes and solutions for an engine that will not start.

Engine Runs Erratic

Troubleshooting steps for an engine with inconsistent or unstable operation.

Engine Overheats

Reasons and remedies for the engine exceeding normal operating temperatures.

Tines Do Not Engage

Solutions for when the tiller's tines fail to rotate or engage.