Bomag BPR 60 D - Page 38

Shift the travel lever Ä Fig. 21 to position "0".
Slightly pull the starter handle Ä
Fig. 22 two times, until
resistance can be felt (compression pressure), and return it
to initial position.
Pull the starter handle Ä Fig. 23 quickly and powerful as far
out as possible.
NOTICE!
Do not let the starter handle hit back, but guide it back.
If the engine does not start during the first attempt, repeat the
starting process.
Fig. 21
Fig. 22
Fig. 23
Operation – Starting with recoil starter
BPR 50/55 D / BPR 60/65 D
38
Go to Discount-Equipment.com to order your parts