Bomag BPR 65 D - Check the Hydraulic Oil Level

Stand the machine horizontally.
ð
Nominal value: Bottom edge of filling/drain bore.
Clean bleeding screw (1) and filling/drain plug (2) and install
with sealing agent (spare parts number: 009 700 16).
Dispose of oil environmentally.
6.9.5 Check the hydraulic oil level
NOTICE!
Park the machine horizontally.
ENVIRONMENT!
Catch running out oil, do not let it seep into the ground
and dispose off environmentally.
Adjust the steering rod with height adjustment Ä Fig. 73 so
that the area with the level inspection plugs is horizontal.
Unscrew the plug.
Hold the travel lever in forward position Ä Fig. 74.
Fig. 72
Fig. 73
Fig. 74
Maintenance – Annual maintenance
BPR 50/55 D / BPR 60/65 D
74
Go to Discount-Equipment.com to order your parts