11
• Strip the fluff by hand, if necessary use a damp
cloth or clean the filter under running water.
• Wipe off the lint by hand, if necessary use a damp
cloth or clean the filter under running water.
• Dry the filter thoroughly and replace if correctly.
Empty the condensation tank
Empty the condensation tankEmpty the condensation tank
Empty the condensation tank
Empty the tank after each drying process!
If the container is overfilled during a running
program, the drying process stops and the indicator
• Loosen the maintenance cover.
Caution, place an absorbent cloth
under it, residual water may leak.
• Open the maintenance cover
completely.
• Open the two opposite locking
levers.
• Pull out the condenser and clean
it, as well as the seals under
running water.
• Reinsert the condenser properly.
• Close both locking levers again.
• Close the maintenance cover and
lock it.
Trou
TrouTrou
Troubleshooting
bleshootingbleshooting
bleshooting
Before you contact an
Before you contact an Before you contact an
Before you contact an authorized specialist
authorized specialistauthorized specialist
authorized specialist
Problem
ProblemProblem
Problem
Cause / Action
Cause / ActionCause / Action
Cause / Action
Appliance does
not work.
∙ Check the power supply. ∙ Is the
appliance switched on? ∙Is a pro-
gram selected? ∙ Consider the max-
imum loading.
The housing is
hot or there is a
smell of burning.
∙ Lint filter is blocked and must be
cleaned. ∙ Condensator must be
cleaned.
Unusual odours
and powerful
vibrations.
∙ The appliance must stand on a
solid base. ∙ Are the feet aligned?
Fabrics are
misshapen.
∙ Always follow the instructions on
the care label of your fabrics.
Error messages
Error messagesError messages
Error messages
With some malfunctions the appliance indicates the
following error codes to warn you:
Display
DisplayDisplay
Display
Reason
ReasonReason
Reason
Action
ActionAction
Action
Blocked lint filter / venti-
lation openings
Clean the filter /
check the openings
To Next Page
Loading...
