BOMANN WTK 5020 - Starting a Program

8
3
33
3 Options
OptionsOptions
Options
These buttons are used to select an additional cycle
for the previously set main program.
4
44
4 Child
ChildChild
Child-
--
-safety lock
safety locksafety lock
safety lock
To activate / deactivate keep pressing the button
combination and for a few seconds.
When activated, all controls, except the power
button, are disabled for operation.
5
55
5 Z
ZZ
ZEIT (Time programs)
EIT (Time programs)EIT (Time programs)
EIT (Time programs)
In the drying program [WARM] you can set the drying
time. By repeatedly pressing the button, you can set
a drying time of 20-30-40-50 or 60 minutes.
6
66
6 1
11
1-
--
-24h
24h 24h
24h -
--
- Start delay
Start delayStart delay
Start delay
By repeatedly pressing the button, the program start
can be delayed between 1 – 24 hours. Press the
STAR/PAUSE button and the unit will start
automatically after the selected time delay has
expired.
7
77
7 Status
StatusStatus
Status indicator
indicatorindicator
indicator
The control lamps indicate the reached drying level
during the running program.
8
88
8 START/PAUSE
START/PAUSESTART/PAUSE
START/PAUSE
Press the button to start / stop the selected or run-
ning program.
9
99
9 Display
DisplayDisplay
Display
- The start delay and the drying time are selected
via the display.
- Nach Programmstart wird die verbleibende Tro-
ckenzeit [REMAIN] als [x:xx] Stunden und Minu-
ten angezeigt.
- After program start, the remaining drying time
[REMAIN] is displayed as [x:xx] hours and
minutes.
- The start delay [DELAY] is displayed when it is
set. The program will start after [xx] hours.
- Error codes are displayed in the case of a fault.
- Explanation of the symbols:
Child safety lock is activated
Empty the condensation tank
Clean the lint filter
Starting a Program
Starting a ProgramStarting a Program
Starting a Program
P
PP
Pr
rr
ro
oo
ogram
gramgram
gram table
tabletable
table
NOTE
NOTENOTE
NOTE:
::
:
The figures listed below are approximate figures and recommendations under normal operating conditions
and are therefore for information only. The program running times and the consumption data may deviate
from the specified figures according to load, remaining moisture, and temperature.
Pr
PrPr
Pro
oo
ogram
gramgram
gram Drying level
Drying levelDrying level
Drying level
Program selection
Program selectionProgram selection
Program selection
information
informationinformation
information
Loading
LoadingLoading
Loading
(dry weight)
(dry weight)(dry weight)
(dry weight)
Remaining
Remaining Remaining
Remaining
moisture
moisturemoisture
moisture
T
TT
Time
imeime
ime
Mi
MiMi
Min.
n.n.
n.
Ene
EneEne
Ener
rr
rgy
gygy
gy
kWh
kWhkWh
kWh
Baumwolle
(Cotton)
Light
For drying normal wet cotton
textiles, e.g. sheets, linen, un-
derwear etc.
8 kg 60 %
65 3.1
Iron dry 90 3.9
Standard* 130 4.8
Extra 150 5.2
Pflegeleicht
(Easy Care)
Light
For drying small loads of hard-
wearing fabrics; e.g. synthetic
fabrics.
3.5 kg 40%
42 1.3
Normal 57 1.6
Extra 60 2.0