Boneco H300 User Manual

33
en
The selected performance level is indicated by the num-
ber of LEDs that light up above the output regulator.
3. Briefly press the control knob once to exit manual
mode and to reactivate AUTO mode.
4. Briefly press the output regulator once more to
switch off the BONECO H300.
If you exit AUTO mode, the BONECO H300 will con-
tinue at the selected output level until the water tank
is empty – regardless of what the current level of
humidity is.
MANUAL CONTROL
1. Briefly press the output regulator once to switch on
the BONECO H300.
The appliance is always in AUTO mode when it is
switched on.
2. Adjust the output to your needs by setting the control
knob to the desired level from 1 to 6. This action exits
AUTO mode (AUTO LED is off).
MANUAL OPERATION (CONTINUED)

Boneco H300 Specifications

General

Timer	Yes
Noise level	51 dB
Air purify rate	90 m³/h
Number of speeds	6
Water tank capacity	4.5 L
Suitable for room area up to	50 m²
AC input voltage	100 - 240 V
AC input frequency	50 / 60 Hz
Power consumption (max)	9.6 W
Power consumption (standby)	0.6 W
Placement	Floor
Product color	Black, White
Built-in display	No

Weight and Dimensions

Width	280 mm
Height	465 mm
Weight	5500 g