28. November 2016 / 3
Safety instructions
Connect the appliance only to AC – with voltage indicated on the rating label.
Using the appliance for a purpose for which it s not intended could pose a serious hazard to health and life.
Never use the appliance if there is any damage to the appliance or cable.
Only operate the appliance when it is completely assembled.
Repairs to electrical appliances may only be carried out by qualified service engineers. Improper repair work can pose a
considerable hazard to the user.
Never pull the plug from the electrical socket by the cable or with wethads.
Do not use the appliance in areas where combustible materials, gases or vapours are present.
Do not introduce any external subjects in the appliance.
During operation, do not put the power cable on top of the appliance because of a danger of fire and hot circuit.
You may only use cords for 10 min. 10 A current strengh.
The appliance is not splash water resistant.
Never immerse the appliance or cable into water or any other liquids because of danger of injuri, fire or electric shock.
Only use original spare parts.