EasyManua.ls Logo

Boneco W1355A - Description of the Appliance; Putting into Operation

Boneco W1355A
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
19
en
Water tank
Upper part
Description of the appliance
Water tank cap
Humidifier gear wheel
Ionic Silver Stick
®
(ISS)
Water base
1 disc assembly
with 21 humidifier discs
Putting into operation
The best location for your appliance is:
On the floor, or on a level, dry surface in the room.
Pay proper attention to easy accessibility and sufficient
space for servicing and cleaning the unit.
For increased evaporation performance in large rooms,
place the appliance near a radiator (warning: a tem-
perature of 50 °C must not be exceeded).
Read the section "Filling the tank" on how to fill the
water tank (12 - 15).
Place the water tank on the lower part (16).
Connect the power cable to the power supply and
switch the appliance on using the On/Off switch.
The unit will reach full capacity about 10 – 15 minutes
after you switch it on.
Ensure that the power cable is not trapped (20). Do not
switch on the unit if the power cable is defective (41).

Related product manuals