"Tank empty" automatic switch-off
The water quantity is easy to see thanks to the transparent
water tank. The LED on the appliance also shows when the
unit should be refilled with water.
Warning: When lifting the upper part off the base, the appli-
ance also switches off. The LED display here also changes
from green to red. Only when the upper part is replaced on
the base does the LED change from red to green and the
appliance continues operating.
Cleaning/maintenance
Switch the appliance off and remove the power
plug from the power outlet before you clean the
appliance (23).
• Regular cleaning is a precondition for hygienic, trouble-
free operation.
• The appliance can be disassembled for cleaning in a
few moves.
• Never submerse the entire unit in water (25).
• The unit must be completely emptied and cleaned, if it
has been filled with water for longer than a week with-
out being used.
Recommended cleaning intervals
The recommended cleaning intervals depend on the air and
water quality, as well as operating times. A thin film of lime
scale on the discs actually increases the humidity output!
• once to twice a year: upper part of housing and fan
• every 2 weeks: water tank and base
• every 4 weeks: humidifier discs
Cleaning the upper part of the housing
Remove the upper part of the unit (29) and wipe out thor-
oughly once to twice a year with a damp cleaning cloth (30).
Cleaning the water tank and base
(every 2 weeks)
• Lift the water tank out of the unit, open the water tank
cap and clean the tank (26 – 28).
• Lift the upper part of the unit off the base and remove
the Ionic Silver Stick (33).
• Fill the base with water, pour in a commercial decalcifi-
cation agent (CalcOff) and allow it to take effect; rotate
the disc assembly a few times by hand (36).
• Empty the water base (37), remove the disc assembly
(38) and rinse (39).
• Remove deposits from the base using a plastic or
wooden brush and a diluted, commercial washing-up
detergent (32).
Cleaning the humidifier discs
(every 4 weeks)
Fill the base with water, pour in a commercial decalcifica-
tion agent (CalcOff) and allow it to take effect; rotate the
disc assembly a few times by hand. Empty the base and
rinse it out together with the disc assembly.
To Next Page
Loading...
Need help?
General
