22
Technical specifications
AC voltage 230 V ~ 50 Hz
Power consumption 9 W / 15 W
Humidification performance up to 300 g/h
Suitable for rooms up to 50 m
2
/ 125 m
3
Water capacity 7 liters
Dimensions (mm) 380x320x425
Weight (empty) 6.0 kg
Operating noise level < 25 dB(A)
Accessories A7017 Ionic Silver Stick
®
(ISS)
A7417 CalcOff
Storage
Empty the water tank. Clean the Air Washer as described
and allow it to dry completely. Remove the screw seal
from the water tank and store it separately to protect the
seal. Store the Air Washer in a dry place, preferably in the
original packaging and away from excessive heat.
Disposal
Give your decommissioned Air Washer to your
dealer for proper disposal. For other disposal
options, please refer to your local authority.
Spare parts
The spare parts depicted can be obtained from
your specialist dealer and installed in the Air Washer by
yourself.
Only original manufacturer's parts may be used.
All other repairs must be carried out by a spe-
cialist or customer service. This also applies to
a defective power cable.
Warranty
The warranty conditions are defined by our representative
in the country of sale.
• Please contact your dealer if, despite strict quality con-
trol, your Air Washer becomes defective.
• You must present your original receipt when making a
claim under the warranty.
Legal notices
The appliance is CE-compliant and meets the following
directives:
• 2006/95/EC for electrical safety
• 2004/108/EC for electromagnetic compatibility
• 2002/95/EC for restriction of the use of certain hazard-
ous materials in electrical and electronic equipment
• 2002/96/EC on waste electrical and electronic equip-
ment
Subject to technical change. These Instructions for Use
are protected by copyright.
Troubleshooting
Problem Possible cause What to do
No function Power cable not connected.
Rotary knob set to the small dot.
Connect the power cable to the outlet.
Set the rotary knob to the medium or large
dot.
Brushing noise Disc assembly is not correctly inserted in
the base.
Insert the disc assembly correctly
No humidification Disc assembly is not correctly inserted in
the base.
No water in the base
Insert the disc assembly correctly
Refill the water tank
LED display lights up red Low water level Refill the water tank
To Next Page
Loading...
Need help?
General
