Bonex aquaProp - Accessories and Spare Parts

aquaProp–SCOOTER
Instruction for use
Version : SG 2015-11 Page | 17
14.1 Accessories
Item:
Item
-
No.
:
Spare battery aquaProp NiMh AP-703
Charger aquaProp AP-505
Scooter stillage aquaProp AP-502
Navigation Unit (Compass + Bottom timer) SC-508
Waistbelt with crotch strap + scooter ring SC-508
Saltwater lead AP-503
Go Pro mounting clip SC-517
Basic travel kit with Tow Cord, Saltwater lead,
O-Ring Set small
AP-701
O-Ring Set small AP-702
Tow Cord with boldsnap AP-504
Propeller aquaProp AP-501
14.2 Spare parts
Pos.
Quantity
Description
Number
1. 1 Propeller with pressure piece 11-13010
2. 1 Brushlessmotor with driveshaft AP-520
3. 1 Slide ring sealing; D=10mm AP-519
4. 1 Groove ball bearing; D=12mm AP-20310
5. 1 Reed sensor; D=4mm AP-521
6. 1 Magnet; D=6mm; AP-20345
7. 1 Step switching unit AP-522
8. 1 Controller AP-523
9. 1 Leg spring 11-31013
10. 1 Fixing pin; D=3 x 36mm; NT-05037
11. 7 Polyamide wheel; M=6mm AP-20350
12. 1 O-Ring; D=128 x 3,5 mm AP-20285-OR
13. 1 O-Ring; D=118 x 3,5 mm AP-20280-OR
14. 2 O-Ring; D=113 x 4,0 mm AP-20430-OR
15. 4 O-Ring; D=12 x 2,5 mm OR-01225
16. 2 O-Ring; D=5 x 1,5 mm AP-20270-OR
17. 1 O-Ring; D=16,5 x 2,4 mm AP-20290-OR