5
6.If you just want to heat up the water, press the adjust temperature buttons
to change the temperature. the temperature setting will be shown on the
display.you may select between the predefined temperature settings: from
40°Cup to 100°C,each 10°C.the temperature set cannot be lower than
the real-time temperature of water in the kettle.after reaching the desired
temperature of water, the kettle switches off with a long beep.
7.If you want to select the keep-warm function, press the adjust temperature
buttons to set your desired temperature.then press the on/off button to
boil water . In this mode, press the keep warm button.then the sign of
keep warm button start to flash,which means enter keep warm mode.The
temperature control from 40℃ to 90℃.each 10℃.The available range of
temperature setting is from 40℃ to 100℃.
8.In order to switch off the keep-warm function, press the keep-warm button
again or ON/OFF button to switch off the kettle. Otherwise the water
temperature will be maintained at a per-set level. If no action is taken for
60 minutes under the keep-warm mode, the kettle will switch off. Press
the ON/OFF button again to turn on the kettle (the kettle beeps once).
11. Lift the kettle from the power base and then pour the water.
NOTE: Operate carefully when pouring the water from your
kettle as boiling water may result in scald, besides, don’t open
the lid while the water in the kettle is hot. Ensure power supply
is turned off when kettle is not in use. The kettle may be stored
on the power base when not in use.
40- 60℃ - blends for babies
70- 80℃ - green and white tea
90℃ - instant coffee
100℃ - black tea
OPTIMUM TEMPERATURE FOR TEA AND COFFEE
To Next Page
Loading...
