Booth BAR3 - Specification and Installation; BAR300 Specification; BAR3 H Specification; Installation Guidelines

Specification
BAR300
Dimensions
570mm(W)
450mm(D)
280mm(H)
Compressor
Tecumseh
THB4422Y
Dry Weight
24kg
This product contains R134a Refrigerant gas with
a GWP of 1430 in an hermetically sealed system
Wet Weight
39kg
Supply
230Vac/50Hz
Refrigerant
R134a 145g
Rated Input
400W
Climatic Class
N
Rated Current
5A
Fuse Rating
5A
IP Rating
N/A
BAR3H
Dimensions
570mm(W)
450mm(D)
280mm(H)
Compressor
Cubigel
NLY60RAa
Dry Weight
28kg
This product contains R290 Propane Refrigerant
gas with a GWP of 3 in an hermetically sealed
system
Wet Weight
39kg
Supply
230Vac/50Hz
Refrigerant
R290a 70g
Rated Input
500W
Climatic Class
N
Rated Current
5A
Fuse Rating
5A
IP Rating
N/A
Installation
The unit must be installed by a competent person, on a firm level surface capable of supporting the
weight of the machine when the bath is filled, and all connections made.
 Ensure that the ventilation openings are not blocked to allow free movement of air through
the unit. Failure to do this will seriously affect the reliability of the fridge, invalidate
the warranty and shorten the life of the fridge system.
 The water bath requires filling prior to switch on. Fill the bath using cold water through the
opening on the top of the machine until water is displaced from the overflow. Discontinue
filling and replace the overflow cap.
Specification and Installation