62
Cooking advices
Pan quality
Adapted materials: steel, enamelled steel, cast
iron, ferromagnetic stainless-steel, aluminium
with ferromagnetic bottom.
Not adapted materials: aluminium and stain-
less-steel without ferromagnetic bottom, cup-
per, brass, glass, ceramic, porcelain.
The manufacturers specify if their products
are compatible induction.
« Keep warm » Function
This function allows to reach and maintain automatically a temperature of 70°C.
This will avoid liquids overowing and fast burning at the bottom of the pan.
• To engage, to start the function « Keep warm » :
Action Control panel Display
Zone selection press display [ 0 ] selected [ 0 ] to [ 9 ] or [ H ]
To engage press on key [ U ] on the “SLIDER“ [ U ]
To stop press on display [ U ] selected [ U ]
slide on the “SLIDER“ [ 0 ] to [ 9 ] or [ H ]
This function can be started independently on all the heating zones.
When the pan leaves the cooking zone of the “Keep warm” function remains active during ap-
proximately 10 minutes. The maximum duration of keeping warm is 2 hours.
Control panel locking
To avoid modifying a setting of cooking zones , in particular during of cleaning the control panel can
be locked (with exception to the On/Off key [ 0/I ]).
• Locking :
Action Control panel Display
Start press on key [ 0/I ] [ 0 ] or [ H ] on 4 displays
Hob locking press simultaneously [ P ] and [ 0 ] no modication
from the front right zone display
re-press on display [ 0 ] [ L ] on 4 displays
• Locking :
Action Control panel Display
Start press on key [ 0/I ] [ L ] on 4 displays
In the 5 seconds after start:
Unlocking the hob press simultaneously [ P ] and [ 0 ] or [ H ] on 4 displays
[ L ] from the front right zone display
press on key [ P ] no light on the displays
To Next Page