Borg & Overstrom b4 - Level Sensor Assembly

B4.2 Install & Operation ManualBorg & Overström AU6
Level Sensor Assembly
PANASONIC
CR 2032
3V
PANASONIC
CR 2032
3V
Check all parts are present. Unscrew lid. Fit both batteries and ret lid.
Exchange the drip tray. Connect the drainage tubing that is
pre-tted down the front left hand side of
the cabinet.
Level sensor positioned in container.
1 2 3
4 5 6
NOTE: A WARNING TONE WILL SOUND WHEN THE WATER RISES (3 BEEPS EVERY
15 SECONDS REPEATED). UPON EMPTYING THE CONTAINER THE WARNING TONE
WILL STOP. CONTINUAL BEEP INDICATES LOW BATTERY POWER.