Why is Borg & Overstrom b4 dispensing water continuously?
If your Borg & Overstrom water dispenser is dispensing water continuously from the ambient, cold, or hot water valve, it could be due to a button being jammed or faulty. Replace the PCB or button panel as needed. Alternatively, debris may be blocking a hole in the diaphragm window, so dismantle the valve and clean it out.
Why are there no LED control lights on my Borg & Overstrom Water Dispenser?
If there are no LED control lights, first, ensure the machine is receiving electricity by checking the power supply and reconnecting it if necessary. Then check the fuse in the IEC socket and replace it if needed. If the problem persists, the control PCB may not be working and may need to be checked and replaced.
Why is the cold water not cold in my Borg & Overstrom b4?
If the cold water is not cold, check if the cooling is switched on. Also, the thermostat might be set too high, so try decreasing the cold thermostat set point. If these steps don't work, the thermostat itself might not be working and may need checking and replacing.
How to fix no water from the ambient valve on a Borg & Overstrom b4 Water Dispenser?
If no water is coming from the ambient valve, first check that the water supply is turned on by ensuring all taps, valves, and filters on the incoming supply are properly fitted and open. Also, verify that the dispenser has electricity/power supply by checking the power cord connection and that the machine is switched on.
What to do if no water comes out of the cold valve on my Borg & Overstrom b4?
If no water is coming from the cold valve, first carry out the same checks and actions as you would for the ambient tap. Additionally, the chiller tank might be frozen due to a malfunctioning thermostat or pump. If frozen, thaw it out and check the thermostat or tank pump. Replace the cold water thermostat or pump and check the electricity supply to the pump. Finally, if a leak detector is fitted, check for internal leakage, ensure the probes are dry, and reset the system.
Why does my Borg & Overstrom b4 make a repeating beeping noise?
A repeating beeping noise from your Borg & Overstrom water dispenser could mean that the level sensor tank is full. Empty the level sensor tank.
Why is my Borg & Overstrom b4 leaking water?
If your Borg & Overstrom water dispenser is leaking, here are a few potential causes and solutions: * Check if the drip tray waste container is overflowing and empty it. Also, ensure the drainpipe is not blocked. * Inspect the supply inlet pipe work and filter for leaks and repair as needed. * Examine the machine's water pipe work fittings for leaks and repair accordingly. Also, level sensors may not be working and may need to be checked, repaired or replaced.
What to do if Borg & Overstrom b4 Water Dispenser tripping out electricity supply?
If your Borg & Overstrom water dispenser is tripping the electricity supply, the machine may be in a high humidity environment, so discuss possible repositioning with the customer. Also, test, identify and address any electrical circuitry faults. See Electrical Diagrams.
Why is my Borg & Overstrom b4 making a bleeping noise?
If the machine is bleeping, and a level sensor is fitted, the tank may be full. Empty the level sensor tank.
Why does my Borg & Overstrom Water Dispenser shake when starting up?
Shaking during start-up can be normal as the compressor starts. However, ensure the machine is on a level surface; use the adjustable feet to level it if the surface is uneven. Also, check for and replace any missing fixings.
Overview of compact water dispenser types and their availability.
Details on self-contained machines, cabinets, and power supply.
Explanation of how the cold tank is chilled via refrigeration.
How ambient water bypasses the cold tank for dispensing.
Process of chilling and carbonating water for sparkling dispense.
How hot water is heated and dispensed via a tank and solenoid.
Explanation of the instant chilling technology and its benefits.
Diagram and labels of the main parts of the water dispenser.
Details on connecting water and CO2 lines to the unit.
Steps for connecting water supply and initial operation.
Procedures for safely disconnecting and removing the machine.
Table of problems, causes, and suggested actions for no water.
Exploded view of components for the Chilled & Ambient model.
Exploded view of components for the Chilled, Ambient & Hot model.
Exploded view of components for the Chilled, Ambient & Sparkling model.
Exploded view of components for the Chilled, Hot & Sparkling model.
Exploded view of the base cabinet unit for floorstanding models.
Electrical schematic for the Chilled & Ambient configuration.
Electrical schematic for the Chilled, Ambient & Hot configuration.
Electrical schematic for the Chilled, Ambient & Sparkling configuration.
Electrical schematic for the Chilled, Hot & Sparkling configuration.
Diagram showing the water flow for Chilled & Ambient models.
Diagram showing the water flow for Chilled, Ambient & Hot models.
Diagram showing the water flow for Chilled, Ambient & Sparkling models.
Diagram showing the water flow for Chilled, Hot & Sparkling models.
Details on the high-efficiency compression system and refrigerants.
Information on the hot water tank and heating element.
Specified range for chilled water temperature.
Specified maximum temperature for hot water.
Dispensing capacity per hour for different configurations.
Electrical power consumption for various models.
Type of power connection required for the unit.
Specification for connecting the water supply line.
Specification for connecting the CO2 supply line.
Physical dimensions for countertop and base cabinet versions.
Weight specifications for different model configurations.
Information about Borg & Overström as the manufacturer.
Classification of the product.
List of models covered by the declaration.
Directives and regulations the product complies with.
List of specific standards and regulations the product meets.
Formal statement of compliance by the manufacturer.
General| Brand | Borg & Overstrom |
|---|---|
| Model | b4 |
| Category | Water Dispenser |
| Language | English |
To Next Page
