BorMann BCD4010 - SAFETY INSTRUCTIONS

WWW.NIKOLAOUTOOLS.GR
EN
SAFETY INSTRUCTIONS
Warning: Read the manual before using this power tool. Failure to follow the warnings and instrucons may result in electric shock, re and/
or serious injury. Aer reading the manual, store it in a safe place for future reference.
Do not expose the machine to rain.
Risk of ying objects or
debris.
Keep bystanders away when
using the machine.
Cauon: The blade connues to
rotate for a few seconds even aer
the power tool has been switched
o.
Wear safety goggles.
Wear hearing protecon.
Do not store the power tool and baery
at an ambient temperature of more
than 45°C. Protect the power tool and
the baery from direct sunlight.
Do not throw the baery into water.
Protect it from water and moisture.
Do not throw the baery
into re.
The guaranteed sound
emission level is 96 dB (A).
• Never allow children, persons with reduced physical, sensory or mental capabilies, or persons unfamiliar with these instrucons to use the machine.
• Do not allow children to play with the machine. Children should not be allowed to clean or maintain this device.
• The power tool must be kept out of reach of children.
• Store the instrucon manual in a locaon accessible to all users of the power tool and always include the instrucon manual when passing it on to other
users.
• Instruct inexperienced persons on the safe use of this power tool.
• Keep in mind that the operator is responsible for harm caused to other people or their property.
• Stop the machine immediately if you are approached.
• Before operang the machine, make sure to wear protecve footwear and long trousers. Do not operate the machine when barefoot or wearing open
sandals. Avoid wearing loose ng clothes, jewellery and es.
• Never operate the machine while people, especially children, or pets are nearby.
• Always inspect the tool before use, and in case the machine is dropped or hits a hard object, check for sign of wear or damage and repair as necessary,
especially the parts of the cung head.
• Check the tool regularly for loose fasteners, damaged parts, such as cracks in the cung aachment.
• Ensure that the air vents are unobstructed.
• Keep the power cord and extension cords away from cung parts.
• Wear eye protecon, protecve clothing and protecve & non-slip shoes at all mes while operang the machine.
• Avoid using the machine under rainy condions.
• Use the machine only in daylight or if the working area is suciently lit by an arcial light.
• Switch on the power tool only when the hands and feet are away from the cung parts.
• Always turn o the power tool, remove the baery and wait unl the blade has come to a complete stop:
1) Whenever the machine is le unaended.
2) Before clearing a blockage on the cung parts.
3) Before checking, cleaning or working on the machine.
4) Aer the power tool has hit a hard object.
5) Whenever the machine starts vibrang abnormally.
• Ensure that your feet and hands are at a safe distance from the cung parts.
• Always ensure that the venlaon openings are kept clear of debris.
• Do not run while operang the machine.
• If the machine breaks down, stop the machine. It must be repaired by the manufacturer or their service agent in order to avoid a hazard.
• Never operate the machine if you are red, ill or under the inuence of alcohol or drugs.
• Keep the cung head below waist level. Always cut from le to right so that debris is thrown away from you.
• The operator must take a break and change working posion aer working for a long period of me.
• Never replace the non-metallic cung part with one that made of metal.
• Warning: Only touch the moving parts if the machine has been turned o and the moving parts of the power tool have come to a complete stop.
• Warning: There is always a risk of kickback when working with electric brush cuers if the cung head comes into contact with a hard object. Kickback will
cause the sudden stalling of the cung head, which in turn results in the cung head being forced in the opposite direcon to the rotaon of the cung
blade. Ensure that you retain a rm grip on the handle with both hands at all mes, pay aenon to the working area to ensure that the cung blade will
not come into contact with hard objects and maintain a rm stance to avoid injury due to kickback.
EN
WWW.NIKOLAOUTOOLS.GR
5