BorMann BCD4010 - TIPS FOR PROPER OPERATION; MAINTENANCE AND STORAGE; TROUBLESHOOTING

WWW.NIKOLAOUTOOLS.GR
EN
ENVIRONMENTAL DISPOSAL
In order to avoid damages on transportaon, the tool has to be delivered in solid packaging. Packaging as well as the unit and accessories are made of
recyclable materials and can be disposed accordingly. The tool's plascs components are marked according to their material, which makes it possible to remove
environmental friendly and dierenated because of available collecon facilies.
Only for EU countries
Do not dispose of electric tools together with household waste material!
In observance of European Direcve 2002/96/EC on waste electrical and electronic equipment and its implementaon in accordance with
naonal law, electric tools that have reached the end of their life must be collected separately and returned to an environmentally compable
recycling facility.
TROUBLESHOOTING
Problem Possible causes Soluon
The power tool does not start
1. The baery is empty.
2. Problem with baery contacts.
1. Charge the baery.
2. Slide the baery into the designated spot
on the handle of the machine. The baery
has to click in place audibly.
There is heavy sparking in the
motor
1. The motor is damaged.
1. Have the machine repaired by a service
technician.
Poor performance
1. Accumulaon of plant residues or
foreign objects in the thread spool.
2. The thread is too short.
1. Remove the foreign objects that have
accumulated in the thread spool.
2. Lengthen the thread by pressing the spool
and pulling the thread at the same me.
TIPS FOR PROPER OPERATION
• Check the thread spool carefully before each use and ensure it is not damaged.
• Only use undamaged thread spools.
• Make sure that the work area is free of rocks, wires, debris and any other hard objects that may cause kickback. If an object cannot be removed, mark its
locaon so that you can avoid touching it with the blade.
• Do not trim wet grass.
• For best cung results, swing the grass trimmer sideways.
• If the grass is long, it has to be cut short in steps starng from the p.
• Keep the power tool away from hard objects to avoid unnecessary wear and tear.
• The safety guard (9) has an integrated thread cuer (K) which keeps the thread length constant during operaon.
• If you are using the grass trimmer for edge trimming, press the spacers (11) down towards the thread spool.
• If you are using the product on corners and edges, you can move the guide wheel (15) along the edge by applying slight pressure.
MAINTENANCE AND STORAGE
• Turn o the power tool, remove the baery and wait unl the cung part has completely stopped moving before carrying out maintenance or cleaning work
and before transporng it.
• Always grab the grass trimmer by the handle while transporng it.
• Use only the manufacturer´s recommended replacement parts and accessories.
• Inspect and maintain the machine regularly. Don’t disassemble the tool or carry out any repairs. Have the tool repaired only by authorized service personnel.
• Secure the machine during transport to prevent damage or injury.
• Store the product, its accessories and the manual in a dark, dry, frost-free, well-venlated place.
• Always store the product in a place that is inaccessible to children.
• Remove dust and dirt regularly.
• Re-lubricate all moving parts at regular intervals.
• Never use causc agents to clean plasc parts.
• Get the machine serviced and cleaned professionally by a specialist at regular intervals.
• Clean the grass trimmer with a moist cloth. Never use strong and/or abrasive cleaning agents. Allow all parts to dry completely.
• Keep the venlaon slots clean and unobstructed.
EN
WWW.NIKOLAOUTOOLS.GR
9