8
3. Installation
This chapter explains:
Equipment inspection
Unpacking the carton
Checking the Accessories
UPS setup and installation
Connecting the EBM(Extended Battery Modules)
Installation requirements
3.1 Inspecting the Equipment
If any equipment has been damaged during shipment, keep the
shipping cartons and packing materials for the carrier or place of
purchse and file a claim for shipping damage. If you discover
damage after acceptance, file a claim for concealed damage.
3.2 Unpacking the Carton
CAUTION: If the carton is unpacked in a low-temperature
environment it may cause condensation in or on the cabinet of UPS.
Do not install the UPS until the inside and outside of the cabinet are
absolutely dry to prevent hazard of electric shock.
CAUTION: The cabinet is heavy. Refer to the following instruction to
unpack and move the cabinet from the packing carton.
The shipping materials are recyclable. After
unpacking, save them for later use or dispose of
them appropriately.
Step 1:
Open the outer carton and remove the accessories package in the
cabinet (see Fig. 3.1&3.2).
To Next Page
Loading...
Need help?
General