Borri B9000FXS 160kVA - User Manual

Rev.
Descrizione
Description
Data
Date
Emesso
Issued
Approvato
Approved
Lingua
Language
Pagina
Page
di Pag.
of Pag.
F Code upgrade 20.05.13 E. Biancucci F. Berti
E 1 54
C
odi
ce / Code
OMD1007
8
English
PRODUCT MANUAL
UNINTERRUPTIBLE POWER SUPPLIES
 B9000FXS 60kVA (3PH / 3PH)
 B9000FXS 80kVA (3PH / 3PH)
 B9000FXS 100kVA (3PH / 3PH)
 B9000FXS 125kVA (3PH / 3PH)
 B9000FXS 160kVA (3PH / 3PH)
 The present manual is an integrant part of the products technical back-up documentation. Read the warnings
with attention as they give important instructions concerning safety.
 This equipment must be used only for its appointed operation. Any other use is to be considered incorrect and
therefore dangerous. The manufacturer cannot be held responsible for damages caused by incorrect, wrong and
unreasonable use.
 Borri holds itself responsible only for the equipment in its original configuration.
 Any intervention altering the structure or the operating cycle of the equipment has to be carried out and
authorized directly by Borri.
 Borri cannot be held responsible of the consequences deriving from the use of non original spare parts.
 Borri reserves its right to carry out technical modifications on the present manual and equipment without giving
any notice. If any typing errors or mistakes are detected, they will be corrected in the new versions of the
manual.
 Borri holds itself responsible for the information given in the original version of the manual in Italian language.
 Right of ownership – copying prohibited. Borri protects its rights on the drawings and catalogues by law.
Borri S.p.A.
Via 8 Marzo, 2 – Soci
52010 Bibbiena (AR)
Tel. +39 0575 5351 – Fax +39 0575 561438
Web site: www.borri.it – e-mail: info@borri.it

Summary

UPS GENERAL DESCRIPTION

RECTIFIER; BATTERY CHARGER

Converts AC input voltage to DC, feeding the inverter and charging the battery.

INVERTER

Converts DC input voltage to AC, stabilized in frequency and RMS value.

STATIC SWITCH

OPERATING MODES

NORMAL OPERATION

BATTERY OPERATION

Explains how the battery feeds the inverter during mains or rectifier failure.

BYPASS OPERATION

FRONT PANEL

ALARMS AND OPERATING STATUS

Lists all possible alarms and their corresponding codes, indicating system status.

GENERAL TECHNICAL INFORMATION

INSTRUCTIONS FOR INSTALLATION

Provides guidance on receiving, storing, and handling the UPS unit.

POSITIONING AND INSTALLATION

Covers environmental conditions, base plans, dimensions, and ventilation requirements.

ELECTRICAL CONNECTION

Guidelines for connecting the UPS, including cable selection and safety precautions.

BACKFEED PROTECTION DEVICE

TERMINAL BOARDS

CONNECTION OF POWER CABLES

Instructions for connecting DC, AC input, and AC output power cables to the UPS.

CONNECTION OF AUXILIARY CABLES

POSITIONING AND CONNECTION OF BATTERIES

Important information on battery installation, safety, and connection requirements.

Borri B9000FXS 160kVA Specifications

General

Power Rating	160 kVA
Frequency	50/60 Hz
Efficiency	up to 96%
Operating Temperature	0°C to 40°C
Topology	Double Conversion Online
Battery Type	Valve Regulated Lead Acid (VRLA)
Communication Ports	RS232, USB, SNMP
Input Voltage	400/230V 3Ph+N+PE
Output Voltage	400/230V 3Ph+N+PE