What to do if my Borri B500EVO-100-B UPS shows 'Battery Disconnect'?
If your Borri UPS indicates a 'Battery Disconnect' error, it may be caused by the battery pack not being connected correctly. Perform a battery test to confirm this. Ensure the battery bank is properly connected to the UPS and verify that the battery breaker is turned on.
Why is my Borri B500EVO-100-B UPS 'On Maintain Bypass'?
The 'On Maintain Bypass' status on your Borri UPS indicates that the maintain bypass switch is open. To resolve this, check the status of the maintain bypass switch.
Safety guidelines for installing the UPS unit.
Safety precautions during UPS operation.
Safety measures for maintenance, servicing, and fault handling.
Safety instructions for transporting the UPS.
Safety guidelines for storing the UPS unit.
Compliance with safety and EMC standards.
Overview of the UPS system and its models.
Detailed specifications and performance characteristics of the UPS.
Procedures for unpacking and inspecting the UPS upon arrival.
Guidelines for connecting power cords and grounding.
Steps for connecting external battery packs to the UPS.
Explanation of the UPS control panel and its components.
Details on different operating modes like Line, Battery, Bypass, HE, Converter.
Procedures for powering the UPS on and off.
How to navigate and use the LCD interface for UPS control.
Explanation of the High Efficiency (Eco) mode function.
Description of the Converter mode for fixed output frequency.
Information on N+X parallel redundancy for UPS systems.
Guidance for resolving issues indicated by warning messages.
Troubleshooting steps for specific fault indications.
Solutions for problems not covered by specific indications.
Guidelines for maintaining UPS batteries.
Procedures for safely replacing and disposing of batteries.
Details on RS232 and USB interfaces for monitoring and updates.
Information on intelligent slots for optional communication cards.
Details on the optional AS400 communication interface.
Instructions for downloading and installing WinPower UPS monitoring software.
To Next Page
General