UPS user manual
Utilizzo dell’UPS
OMS02083 REV. A 25
5.3.1 Display of alarms history
All the events are recorded in the alarms history.
Select the HISTORY menu
Latest event stored (in order of time)
E.g.: automatic reset of alarm “A15 –
BYPASS FAULT”
Immediately prior event
E.g.: alarm “A15 – BYPASS FAULT”
First event stored (in order of time)
The first event shown is the latest one in order of time; a new event makes all the other
events automatically shift one position, clearing the oldest event.
The quantity of stored events is displayed on the first line (xxx/yyy), which contains the data
currently displayed (position in the list) and the total number of stored data (maximum number
equal to 500) respectively. An asterisk indicates the automatic reset of the alarm.
To Next Page
Loading...
