UPS user manual
Utilizzo dell’UPS
30 OMS02083 REV. A
Nominal autonomy in minutes
Access the menu by pressing the button
(ENTER).
The single digits can be modified via the arrow
keys (
/ ) and confirmed by pressing
(ENTER).
Confirmation screen of the parameter set.
The next parameter can be set by pressing the button
(ENTER) and so on until the
confirmation screen of all the settings done will appear.
Setting all the parameters
To save all the parameters it is necessary to reach the end of the guided procedure
until the last confirmation screen I shown.
If the procedure is interrupted earlier, none of the parameters previously set will be
saved.
To Next Page
Loading...
