12 | English
Symbols
The following symbols are important for reading and under-
standing the original instructions. Please take note of the
symbols and their meaning. The correct interpretation of the
symbols will help you to use the product in a better and safer
manner.
Symbol Meaning
Movement direction
Reaction direction
Weight
On
Off
Lo Low pressure
Hi High pressure
Symbol Meaning
Accessories
Product Description and
Specifications
Read all safety warnings and all instructions.
Failure to follow the safety warnings and in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the ending of this operat-
ing manual.
Intended Use
The product is intended for cleaning areas and objects out-
side the house, tools, vehicles and boats, if the appropriate
accessories and cleaning agents are used.
The intended use is related to operation within 0°C and
40°C ambient temperature.
This product should not be used for professional use.
Technical Data
Pressure washer EasyAquatak 100 EasyAquatak 110 EasyAquatak 120
Article number
3 600 HA7 E.. 3 600 HA7 F.. 3 600 HA7 9..
Rated power kW 1.1 1.3 1.5
Supply temperature max. °C 40 40 40
Supply rate min. l/min 5.5 5.5 5.9
Allowable pressure MPa 10 11 12
Rated pressure MPa 6.7 7.4 8
Rated Flow l/min 4.5 4.7 5.4
Maximum inlet pressure MPa 1 1 1
Autostop Function ● ● ●
Weight according to EPTA‑Procedure
01:2014
kg 3.3 4.2 4.7
Protection class
/ II / II / II
Serial number See serial number (rating plate) on pressure washer.
The values given are valid for a voltage [U] of 240V. For different voltages and models for specific countries, these values can
vary.
Noise/Vibration Information
3 600 HA7 E.. 3 600 HA7 F.. 3 600 HA7 9..
Noise emission values determined according to EN 60335-2-79.
Typically the A-weighted noise levels of the product are:
– Sound pressure level dB(A)
80 85 80
– Uncertainty K dB
3.0 3.0 2.0
Wear hearing protection!
Vibration total values a
h
(triax vector sum) and uncertainty K determined according to EN 60335-2-79
– Vibration emission value a
h
m/s
2
1.8 4.0 1.7
F 016 L94 123 | (22.11.2022) Bosch Power Tools
To Next Page
Loading...
