Bosch 200 R - Installation Information for Cylinder Without Solar Coil (360 C); Filling the Water Heater

Installation information for cylinder without solar coil
200-300 R/C, 200-300 R, 360 C – 6 720 801 192 (2017/07)
35
7 Installation information for cylinder without
solar coil
Double-shelled hot water heater, copper (C).
Fig. 77 360 C
Fig. 78 360 C
[1] Flow line from heat pump
[2] Sensor pocket/thermometer connection
[3] Return to heat pump
Fig. 79 Ceiling connections
[1] Venting
[2] Hot water
[3] Cold water
Fig. 80 Ceiling connection dimensions 360
Filling the water heater
6720646738-10.1I
6720646738-11.1I
2
3
2
1
WARNING: The water heater can crack if filling is
performed in the wrong order.
▶ Fill and pressurise the water heater before filling the
heating system.
Do not forget to vent after filling the outer shell and
commissioning the system.
2
1
6720646738-12.1I
3
6720646738-13.1I
695
100
125 125
695