S
shannon85Jul 27, 2025
How to enable accelerated cooling/heating on Bosch BOVA?
- JJessica GilesJul 27, 2025
To enable accelerated cooling or heating on your Bosch Heat Pump, change the SW4-4 setting to 'ON'.
How to enable accelerated cooling/heating on Bosch BOVA?
To enable accelerated cooling or heating on your Bosch Heat Pump, change the SW4-4 setting to 'ON'.
Provides general safety advice and manufacturer recommendations for installation.
Steps for evacuating the system to remove air and moisture using a micron gauge.
Safety warnings and requirements for connecting the high voltage power supply.
Instructions for installing a disconnect switch and grounding the unit.
Sequence of actions to safely start the unit after installation.
Instructions for charging by weight, including calculations for lineset length.
Procedure for charging using subcooling in cooling mode above 55°F outdoor temp.
Provides detailed diagnostic flowcharts for various system error codes.