Bosch 300 Series - Cleaning and Maintenance; Cleaning The Tub

HomeConnect® en-us
31
Basic setting Display
text
Selection Description
Remote Start rc1 rc0 - rc2 Activate or deactivate
→ "Remote Start ",
Page33 .
The following settings are
possible:
¡ With the setting "rc0",
the option is perma-
nently deactivated.
¡ With the setting "rc1",
the option can be se-
lected via the but-
ton.
→ "Activating Remote
Start ", Page33
¡ With the setting "rc2",
the option is perma-
nently activated.
The basic setting is not
available until you have
connected the appliance
with the HomeConnect®
app.
→ "HomeConnect® ",
Page31
Factory setting rE Starting with
YES
Confirming
with
Restore changed settings
to the factory settings.
The settings for initial use
must be configured.
1
Factory setting (may vary according to model)
14.2 Changing the basic
settings
1. Press ⁠.
2. To open the basic settings,
press for 3 seconds.
a The display shows Hxx.
a The display shows ⁠.
3. Press repeatedly un-
til the display shows the re-
quired setting.
4. Press repeatedly until the
display shows the right value.
You can change one or more
settings.
5. To save the settings, press
for 3 seconds.
HomeConnect®
15 HomeConnect®
HomeConnect®
This appliance is network-capa-
ble. Connecting your appliance to
a mobile device lets you control its
functions via the HomeConnect®
app.
The HomeConnect® services are
not available in every country. The
availability of the HomeConnect®